Rail Mounted Single Loop Intelligent Digital Display Temperature Process Controller

Product Description

Q5780 series eight-loop digital display controller adopts the surface mounting technology and is produced by fully-automatic placement machine, which has strong anti-interference ability. The instrument supports a variety of signal inputs, and can be used with various types of sensors and transmitters to realize the measurement and display of physical quantities such as temperature, pressure, level, speed, force, etc. The instrument can display eight measurement signals at the same time, and it can be used with two unified alarms, eight separate alarm outputs, one optional variable output function, RS485/232 communication, drive printing and other output functions, and it is suitable for systems that need to carry out multi-measurement point detection. Detection of the system for multiple measurement points




Technical Parameter

Inputs
Input Signal	Current	Voltage	Resistance	Couple
Input Impedance	≤250Ω	≥500KΩ
Input current maximum limit:	≤30mA
Input voltage max. limit		≤6V
Output
Output Signal	Current	Voltage	Relay	24V Power Distribution or Feeder
Output load capacity	≤500Ω	≥500KΩ (Note: Module must be replaced if higher load capacity is required)	AC220V/0.6(small) DC24V/0.6A(small) AC220V/3A(big) DC24V/3A(big) See Remarks	≤30mA
Integration Parameter
Measurement accuracy:	0.2%FS±1 word
Setting mode	panel touch key digital setting: parameter set value password lock: set value power failure permanent storage.
Display mode	-1999~9999 measured value display, 0~100% measured value column display, light-emitting diode working status display.
Use environment:	ambient temperature: 0~50ºC: relative humidity: ≤85%RH: avoid strong corrosive gases
Working power supply	AC 90~265V (switching power supply), (50-60HZ) DC20~29V (switching power supply))
Power consumption	≤5W
Structure	Standard snap-in type
Communication	Adopting standard MODBUS communication protocol, RS-485 communication distance can reach 1 kilometer, RS-232 communication distance can reach 15 meters. Note: When the instrument is equipped with communication function, it is better to use active converter for communication.

Remarks: The permissible load capacity of relay output of instrument with external dimension G is AC220V/2A, DC24V10.6A.




Product Features

It can be used with all kinds of sensors and transmitters to realize the measurement and display of physical quantities such as temperature, pressure, liquid level, speed, force, etc. It can display eight measurement signals at the same time, and it can be used with two unified alarms, eight separate alarm outputs, one optional variable output function, RS485/232 communication, drive printing and other output functions, which is suitable for systems that need to carry out multi-measurement point detection.