Industrial Heating Temp Control Intelligent LED Display Digital Temperature Indicating Controller

• Customization: Available
• Customized: Customized
• Certification: ISO9001, CE
• Model NO.: Q5720
• Transport Package: Carton Packing
• Origin: China
• Production Capacity: 120000 Pieces / Year

Product Description

 

Q5720 series of multi-channel digital inspector adopts surface mounting technology, fully automatic chip machine production, with strong anti-interference ability. The instrument supports a variety of signal types input, can be used with various types of sensors, transmitters, to achieve the temperature, pressure, level, speed, force and other physical quantities of the measurement display, can cycle display multiple measurement signals, can be with two unified alarms, one respectively variable output function, RS485/232 communication, drive printing and other output functions, suitable for the need to carry out multi-measurement point detection system.

Technical Parameter
 

Inputs
Input Signal	Current	Voltage	Resistance	Couple
Input Impedance	≤250Ω	≥500KΩ
Input current maximum limit	≤30mA
Input voltage max. limit		≤6V
Output
Output Signal	Current	Voltage	Relay	24V Power Distribution or Feeder
Output load capacity	≤500Ω	≥500KΩ (Note: Module must be replaced if higher load capacity is required)	AC220V/0.6(small) DC24V/0.6A(small) AC220V/3A(big) DC24V/3A(big) See Remarks	≤30mA
Integration Parameter
Measurement accuracy	0.2%FS±1 word
Setting mode	panel touch key digital setting: parameter set value password lock: set value power failure permanent storage.
Display mode	-1999~9999 measured value display, 0~100% measured value column display, light-emitting diode working status display.
Use environment	ambient temperature: 0~50ºC: relative humidity: ≤85%RH: avoid strong corrosive gases
Working power supply	AC 90~265V (switching power supply), (50-60HZ) DC20~29V (switching power supply))
Power consumption	≤5W
Structure	Standard snap-in type
Communication	Adopting standard MODBUS communication protocol, RS-485 communication distance can reach 1 kilometer, RS-232 communication distance can reach 15 meters. Note: When the instrument is equipped with communication function, it is better to use active converter for communication.

Product Features

Support a variety of signal types input, can be used with various types of sensors, transmitters, to achieve the temperature, pressure, level, speed, force and other physical quantities of the measurement of the display, the cycle can be displayed on the multi-channel measurement signals, can be brought to the two unified alarms, all the way to a separate transmitter output function, RS485/232 communication, drive printing and other output functions, suitable for the need to carry out the detection of multi-measurement points of the system.